Product Name: Switching Power Supply
Model Number: HTPSB130
Place of Origin: China

1) Input specifications:
a) Input voltage: 110-230V AC 5%(90V AC-264V AC)
b) Input frequency: 50 / 60Hz 10%(45Hz-66Hz)
c) Fuse: A frse is included in the AC line circuit. The fuse rating
is as to prevent hazard in the event of an intemal failure of the power
supply.
d) Inrush current: <20A/ms.
e) Earth leakage current: the earth leakage current does not exceed
0.25mA at 264V AC 66Hz input and the Min load condition.
f) Efficiency: 75%min,at 220V AC input full load test

2) Output specifications:
a) Output voltage:
Output1 +3.30v / 100-2000mA/+3.14V-3.46V(voltage limit)/5%tolerance
Output2 +5.00/0-1000mA/+4.75-5.25(voltage limit)/5%tolerance
Output3 +12.0/20-500mA/+11.4-12.6(voltage limit)/5%tolerance
Output4 +24.0/20-100mA/+21.6-26.4(voltage limit)/7%tolerance
Output5 +30.0/0-100mA/+27.0-33.0(voltage limit)/5%tolerance

b) Output ripple:
Measurement of ripple includes a 0.1uF ceramic capacitor and a 47uF
electrolytic capacitor at the output of measuring oscilloscope.
Line ripple: measured with an oscilloscope with a bandwidth of 100 MHZ
Switching ripple: measured with an oscilloscope with a bandwidth of 100MHZ

Output1\2: 30mV at peak-peak line ripple; 200mV at peak-peak switching ripple
Output3\4\5: 60mV at peak-peak line ripple; 200mV at peak-peak switching ripple

c) Turn on delay time:1S max,at normal line full load
d) Hold on time:20mS min,at 220Vac line max load
e) Over Current Protection:The power supply protects itself from any over
current conditon
f) Thermal protection: the power supply protects itself down if it
overheats. It resets itself with no operator inventon
g) Shorted Output: all output with stand an indefinite short to Gnd,under
any load condition on the other output
h) HI-pot Test: Dielectric Withstand Voltage ACinputL. N to all output
connectors 3000V AC for 1 minute TEST
i) Burn-In: all power supplies will go through 4 hours of burn-in at 40
temperature chamber under the nominal input and 80% of the
maximum load condition,before delivery to AMP
j) PCB dimensions and weight: 165 x 70 x 45(L x W x H),0.20kg max